Waterdecal for nails Blue marble effect BN-1351

Waterdecal for nails Blue marble effect, very thin, in very high definition stamping.

The sheet contains several 10 decals blue marble effect that can be applied on any type of nail and produced with the simple help of water.

Ideal for total or partial nail coverage. The decals have different sizes to fit the various fingers.

The package contains a single small sheet of size 6 x 5,5 cm.

HOW TO USE

1. Lay a colour or base on the nail with a inhibition layer and cure. In place of the inhibition layer (on matted surfaces) a little bit of adhesive may be used as a layer of acid-free primer;
2. Cut out your chosen design as close to its edges as possible;
3. Wet a cotton disk or put some water on a surface and place the waterdecal with the design facing upwards. Leave it a few seconds;
4. Remove the waterdecal from the water with the help of a tweezers and place it on a dry surface;
5. Take the waterdecal gently with one tweezers for nail art to separate it from paper or with a silicone stamper and make it adhere to the surface of the nail (with the drawing pointing upwards);
6. Spread any folds with a silicone brush;
7. If you need to overlay more designs you can help with a little bit of acid-free primer to pass along the edges of the subjects;
8. Before sealing, remove any surpluses that come out of the edges of the nail with a little bit of acid-free primer and buffer. Make a double sealing with a elastic top.